Application Advantages
・ Penetrates into the capillaries present in the concrete and seals them
・ Can be applied on fresh, old concrete surface
・ Improves strength of concrete surface with abrasion and impact resistances
・ Excellent adhesion with epoxy intermediate/top coats, polyurethane top coats and concrete
・ Eco-friendly, low-VOC, high-solids, cost-effectively formula
・ Also can be applied to coat on metal surface
Application Procedure
   While applying Kingcoat FP-210HS coat, surface preparation is the most important part. Remove all the loose materials to expose the base surface. Wash the surface with plenty of water. A 10% muriatic acid solution wash should follow. Again wash the surface with plenty of water. Let the surface dry to saturated surface dry (SSD) condition. Fill all the cracks, honey-combs, voids etc, using cement mortar or our Kingbond repair compound. Let the surface dry completely and polish it with grinding leveling. Mix the A and B parts of Kingcoat FP-210HS thoroughly, to get a uniform consistency. Apply a coat of Kingcoat FP-210HS liberally by brush or roller over the surface. Allow the surface to be touch-dry. The surface is now ready for intermediate/top epoxy or final polyurethane coating. Apply the necessary topcoat over this primer coat for best results.
Application Areas
・ Industrial manufacturing facilities, warehouses, airports
・ Chemical and pharmaceutical plants
・ Outdoor stadium, court and swimming pool
・ Workshops, laboratories, garages
・ Outdoor/indoor wall, road, bridge
・ Commercial traffic floors